2GIG Packages 2GIG-GCKIT410 Powered by Alarm.com
2GIG TECHNOLOGIES 2GIG-GCKIT410 GO!CONTROL Z-WAVE WIRELESS CONTROL PANEL 4-1-0 KIT
- Be the first to review this product
- 6-Piece Go!Control Security System Kit with everything needed for Setup
- Control panel with built-in Z-Wave RF protocol
- Over-the-air updates prevent software from becoming outdated
- 4 Door/Window Contacts with up to 350 foot wireless RF signal range
- 1 PIR Motion Detector with 30 foot x 50 foot sensor range
- Remote management and monitoring capability*
Get your home security system started with a 2GIG Go!Control Z-Wave Wireless Control Panel 4-1-0 Kit. This security system kit features one 2GIG Go!Control Z-Wave Wireless Control Panel, four Door/Window Contacts and one Passive Infrared (PIR) Motion Detector. The Go!Control Panel can be used as a central station, or hub, for users wishing to grow their security system and home automation network by adding in additional 2GIG and/or Z-Wave enabled products. This system is compatible with remote management and monitoring through a web-enabled Smartphone, tablet or computer, though an additional service plan is required*.
Go!Control Z-Wave Wireless Control Panel
The Go!Control Z-Wave Wireless Control Panel from 2GIG has a built-in Z-Wave RF Protocol allowing it to act as a central hub for a communicating network of wireless RF 2GIG and Z-Wave enabled products throughout a home. This intelligent all-in-one home management solution has an easy-to-navigate color touchscreen with two quick access buttons for use in the event of an emergency or to simply return to the home screen at any point. Clear voice response notifications from the Go!Control Z-Wave Panel are relayed to the user to indicate the system’s status, zone descriptions, and emergencies. The self-contained wireless panel allows for 32 user codes to monitor up to 48 wireless zones and 2 hardwired zones and contains a 24 hour backup battery. Date, time, and weather are also available on the panels touchscreen with live weather updates delivered through the devices GSM radio (requires service plan).
The Thin Door/Window Contact sensor from 2GIG Technologies can be installed on windows, doors, and many other objects that open and close around a home or office. The Door/Window Contact sensor transmits RF signals to the 2GIG Go!Control Panel when the magnet is separated from the sensor. The sensor has an external input that accepts Normally Closed (N/C) dry contact devices and the sensor is equipped with a tamper-resistant cover for additional security. The sensor and magnet should be mounted at least 4.7″ above the floor to avoid damage and they should be not be mounted in an area where they will be exposed to moisture. Two included CR2032 batteries (included) power the Thin Door/Window Contact.
PIR Motion Detector
A wireless PIR Motion Detector from 2GIG Technologies adds an additional layer of security to a home by alerting users when motion is detected. Upon detection the device can be set to alert via an audible chime and/or report detection to the central control panel. When integrated into a 2GIG Go!Control Z-Wave Control Panel, owner’s can remotely view these alerts via a Smartphone, tablet or computer at any time and even receive a text alert when a PIR Motion Detector is triggered (service plan required for remote monitoring and management).
The Passive Infrared Motion Detector is wireless and wall-mounted for quick setup with a maximum sensor detection range of up to 30 feet x 50 feet. To prevent false alerts caused by a family pet the PIR Detector is pet immune up to 55 lbs. The device has a wireless RF transmission range up to 350 feet in open air when used with the 2GIG Go!Control Panel and it is tamper protected.
Includes: 2GIG-CP21-345E GC2 Panel (English)
 2GIG-DW10-345 Door/window contacts
 2GIG-PIR1-345 Passive infrared motion detector
NOTE: POTS and Cell radio modules not included.
Order Number: 2GIG-GCKIT410